Measurement | Value |
---|---|
Colour | White, Brown and Anthracite Grey |
Width | 52mm |
Height | 52mm |
Thickness | 1.5mm (25mm with protruding fixing peg) |
Compatibility | Suitable for use with Exitex Capex Snap Down 10-25 Glazing Bar |
Materials | Plastic PVC-u |
Exitex Capex Snap Down Bar End Cap
SKU: EXI-2136-1001
MPN:
RBEC-B
10+ in stock
Order within
for Same Day Despatch
End Cap for Exitex Capex Snap Down Glazing Bar
(Choice of colour)
Protects ends of glazing bars!
Simple and strong push-fit plastic end cap for closing the open end of the Capex Snap Down 10-25 Glazing Bar.
Fitting these end caps is really straight forward. Once a little silicone sealant has been applied to the underside of the short lip on top of the end cap, just push into place.
Features & Benefits
- Protection for ends of glazing bar
- Made from tough PVC-u plastic
- Fits easily to Capex Snap Down bars
- Part of Exitex Capex Snap Down system
- Low cost lean-to roof glazing
Exitex are a leading manufacturer of weather-proofing products, with over 40 years experience in the design and manufacture of aluminium and uPVC glazing solutions, including Capex Snap Down.
Fitting & Usage
Fitting the Exitex Capex Snap Down Glazing Bar and End Cap
The following is offered as a guide to typical installation, and not intended as comprehensive fitting instructions.
- Cut Base Bar and Top Capping to same length as polycarbonate sheet
- Fit EPDM rubber gasket (may need to be torn into two along the length) to track on either side of Base Bar
- Pre-drill fixing holes along length of base bar and between toothed up-stand
- Fixings should be no more than 500mm apart and within 100mm from either end
- Screw the Base Bars to rafters using 5mm wood screws
- Peel protective film from edges of polycarbonate sheets to prevent being strapped by glazing bar
- Position Top Capping over Base Bar and push legs firmly into up-stand to ensure seal
- Fit end closure to polycarbonate sheet, using thin bead of silicone on underside of top face
- Apply a little silicone sealant to underside of End Cap top lip and push firmly onto glazing bar
Additional considerations
- It is assumed that polycarbonate sheet length is cut with allowance for a 50mm overhang into the gutter.
- A glazing width deduction of 21mm from rafter centres will allow for Base Bar up-stand, plus expansion and contraction.
- Fixing buttons can be used along eaves or purlins to secure sheets that are large, or in exposed locations.
- Capex Snap Down works best with roofs over 5° pitch.
Christmas Delivery Schedule
Business as usual! We remain open throughout the festive period – except Saturdays and Bank Holidays – and will continue to dispatch orders on the same day (pre-1pm) where possible.
Courier (Small, Medium, Large)
Expect very little disruption to our small to large parcel services, except for 24th and 31st, where our couriers will collect earlier than usual (order by 10am on these days to secure same day dispatch). Small and medium parcels will be delivered Monday to Saturday excluding Bank Holidays. Large parcels, Monday to Friday, excluding Bank Holidays.
Courier (XL, XXL)
Our freight courier is offering a reduced service going into the new year. To secure delivery before Christmas, please order by 1pm on 20th. We are not receiving any collections on 23rd, 24th, 30th, 31st and 1st.
Special Delivery
As our suppliers and delivery partners take a well-earned break, all orders placed in December for Special Delivery will be fulfilled next year, in the first two full weeks of January. Our Customer Service team will be contacting all customers by 8th January to confirm delivery dates.
Products include polycarbonate, glazing bars, fascia and soffit, cladding, fencing, decking, corrugated roofing, and all items above 4m.
If your order is particularly time sensitive, please contact us before placing your order to save disappointment.
SHIPPING
We endeavour to despatch most orders placed within 1 working day, where possible we will despatch orders on the same working day if payment is received before 1.00pm. Accurate despatch times can be found on individual product pages.
Most orders (those being stock items below 1.2m in length) will be despatched same day when ordered before 1pm, and received the following delivery day. We deliver items of that size from Monday to Saturday. Stock items over 1.2m are sent using a two-day carrier, who do not deliver on a weekend.
Due to the size and nature of some bespoke, and non-stock products, we offer restricted delivery options. Delivery options can be selected at the checkout page before payment Is made.
DELIVERY AND RETURNS
Any dates quoted for delivery of the goods are approximate only and Truly PVC shall not be liable for any direct, indirect or consequential loss suffered by the customer arising from any delay in the delivery of the goods.
All deliveries must be received, and where appropriate, signed for, by a person over the age of 18 years old.
Delivery shall take place and risk shall pass to you upon the earliest of the following:
- - goods are handed over to the customer or its agent at the Company’s premises, or
- - the goods leave the premises of Truly PVC, or
- - on the 7th day following notification to the customer that the goods are ready for despatch.
Customers should notify us within 7 days of the date of the invoice for any alleged defect damage, failure to comply with description, delivery failure or discrepancy or any missing items, components or products. If you fail to comply with these provisions, the goods shall be conclusively presumed to be in accordance with the Contract and free from any defect or damage, and you will be deemed to have accepted the goods.
Customers will also be responsible for obtaining all necessary licences and permissions for the import of the goods into the country of destination.
Long Lengths (over 1.2m)
For any product over 1.2m in length we cannot guarantee a ‘Next Day’ delivery service. Products over 1.2m have to be manually handled in some Depots and this can often add 1 – 2 days to the delivery time.
DELIVERY PROHIBITIONS
If your order is for an aerosol item, is over 1 metre in length, and you live in a remote location such as the Scottish Highlands, offshore islands or Northern Ireland, we may not be able to fulfil your order or have to add a levy surcharge to cover the extra delivery costs to these areas.
Should this be the case, we will contact you with the option of either paying the surcharge or cancelling the order. Remote postcodes include AB30-AB38, AB40-AB56, BT, FK17-FK21, G83, GY, HS, IM, IV, JE, KA27-KA28, KW, PA20-PA99, PH, TR21-TR25, ZE.
COLLECTION (from our Warehouse)
To collect your order from our Warehouse, simply choose 'Collect in Person' as the Shipping Method. We shall call you if there is a problem preparing the order, so be sure to provide a contact telephone number when ordering. Stock items are usually available for collection 1 business day from order being placed. To enquire about early collection or non-stock items like polycarbonate, please call 0161 339 4982.
Our Warehouse, which is located at the following address, is open for collection between 8:30am and 4:30pm Monday-Friday, 8:30am to 12:30pm on Saturdays, and 8:30am to 4:30pm on Sundays.
Unit 2, 34 Wood Street
Openshaw
Manchester
M11 2FB
*Bespoke items may take 1-2 working days to prepare for collection, with non-stock items, such glazing bars and roof sheets taking longer. Please enquire before making your journey to collect.