Shop the brand

1 14

FloPlast Niagara Ogee 110mm Gutter

FloPlast Niagara Ogee 110mm Gutter

SKU: FLO-2177-1001
MPN: RAN3AG

£8.48

Sale Sold out

Tax included. Shipping calculated at checkout.

Low stock: 10 left

Order within

h m s

for Same Day Dispatch

Quantity

View full details

Description

Niagara Ogee 110mm Gutter Parts from FlowPlast

Name: FloPlast Niagara Ogee 110mm Gutter
Brand: FloPlast
SKU: FLO-2177-1001
Price: 8.48 GBP
Availability: InStock

(Choice of component and colour)

Everything needed for Niagara guttering!

Gutter parts for the high capacity ogee profile FloPlast Niagara rainwater system. The attractive scalloped face offers a traditional appearance, with a smooth easy-clean surface, that looks great on any home.

The FlowPlast Niagara gutter parts and lengths, carry the British Standard Institute (BSI) Kitemark, and are manufactured using the best quality PVC-u, manufactured to BS EN 12200-1, and the system also proudly meets the requirements of BS EN 607, and BS EN 1462.

At 110mm wide and 80mm deep, the FloPlast Niagara gutter is an excellent choice for both old or new domestic and small commercial properties.

Features & Benefits

Traditional appearance - attractive scalloped face
High flow rate - double capacity of half round
Reliable water seal - pre-fitted gasket and clip
Improved aesthetics - concealed top-hung bracket option
Quick and easy fitting - parts just clip together
Choice of downpipe - square (65mm) or round (68mm/80mm)
10 year guarantee - colour and performance you can trust

The FloPlast Niagara Ogee Gutter System

Floplast Niagra Ogee gutter and components

DID YOU KNOW? For large roof areas, the Niagara ogee guttering can be fitted with an 80mm round downpipe, which will provide even greater flow rate.

Specification

Measurement	Value
Gutter Size (w x h x l)	110mm x 80mm x 4m
Component Size	Please refer to picture diagrams for size of individual parts
Application	Domestic rainwater system for homes, conservatories, and small commercial properties.
Material	PVC-u (Un-plasticised Poly Vinyl Chloride)
Colour	White, Black, Brown(suits Rosewood or Mahogany frames),and Anthracite Grey
Quality and Standards	The FloPlast Niagara, Half Round and Square Line products are manufactured under a quality management system assessed and registered as meeting BS EN ISO 9001:2000, and carry the British Standard Institute (BSI) Kitemark (KM501316), having passed the requirements of: BS EN 607: 2004 (Gutters and fittings) BS EN 12200-1:2000, BS EN 1329-1:2014 and BS 1453-1:2000 (Downpipes and fittings) BS EN 1462: 2004 (Gutter brackets)
Fire Resistance	FloPlast gutters, pipes and fittings are manufactured in PVC-U, which is not easily ignitable and will not support combustion.

Gutter Flow Rate

When planning rainwater guttering, be sure that the flow rate of the configuration exceeds the calculated runoff from the roof. We have created a How to Measure Roof Rainwater Runoff blog post that can help calculate the runoff for a standard mono-pitched roof.

End Outlet in Gutter

System	Downpipe	Gutter Level		Gutter with Fall (1:350)
System	Downpipe	Gutter Flow (litres/sec)	Roof Area (m²)	Gutter Flow (litres/sec)	Roof Area (m²)
Half Round	68mm Round	0.92	44	1.17	56
Square Line	65mm Square	1.7	81	2.00	96
Niagara	65mm Square	2.4	115	2.90	139

Centre Outlet in Gutter

From this we can see that a centre outlet almost doubles drainage so is more efficient and could mean less outlets required.

System	Downpipe	Gutter Level		Gutter with Fall (1:350)
System	Downpipe	Gutter Flow (litres/sec)	Roof Area (m²)	Gutter Flow (litres/sec)	Roof Area (m²)
Half Round	68mm Round	1.80	86	2.60	125
Square Line	65mm Square	3.41	163	3.95	189
Niagara	65mm Square	4.50	216	5.30	139

Contents

In this listing you can buy...

Gutter Union

Straight union joint for inline connections of Niagara ogee gutter lengths over long spans.

External 90° Corner

Outward facing right-angle corner joint for houses and Edwaridan style conservatory gutter.

External 135° Corner

Angle joint for corners of standard Victorian conservatories and 3-sided household bays.

Internal 90° Corner

Gutter joint for inward facing right-angle corners when projected roof returns across front of house.

Internal 135° Corner

Inward joint for returning typical Victorian bay gutter across front of conservatory or house.

Running Outlet

Fits between inline lengths of Niagra ogee gutter to provide a drainage outlet for downpipe.

Stopend

Simply clips to the gutter opening to seal. Choose left or right when viewed from outside.

Internal Stopend

Fits into gasket and clip sockets to create a stopend on unions, corners and running outlets.

Stopend Outlet

Clips to length of gutter to seal and provide outlet. Left or right when viewed from outside.

Fascia Bracket

Screws to fascia board and wraps around underside of gutter for a strong, secure hold.

Fascia Bracket (Top Hung)

Concealed brackets support from above, offering cleaner finish to underside of gutter.

Gutter Clip

Wraps around unions, corners, stopends etc, to provide a strong watertight guttering joint.

Gutter Gasket

Rubber seal for replacing perished gaskets on joints between FloPlast Niagra gutter lengths.

Fitting & Usage

How to fit the FloPlast Niagara Ogee 110mm Gutter

The following is offered as a simple overview of fitting FloPlast gutter to a standard domestic fascia. For detailed advice, please refer to the step-by-step or detailed fitting instructions.

Plan the installation with gutter system and components based on the design and flowrate of your roof.
Position running outlet directly over the drain, and fit no more than 50mm below the level of the roof tiles.
Fit a bracket 100mm short of opposite end from outlet, and tie a plumb line to it, with the string from the top face of the bottom, where the gutter rests.
Stretch the plumb line and tie to the outlet, with the string on top face where the gutter rests.
Check that there is a fall towards the outlet of 1:350 to encourage efficient drainage.
Measure, mark and fix brackets along the fascia, using the plumb line for vertical position.
Maximum spacing of 1m for Half Round and Square Line, and 800mm for Niagara ogee.
Maximum spacing of 400mm in areas of heavy snowfall.
Fit no further than 150mm from any joints, such as unions, corners and stopends.
Use 25mm x 5mm roundhead brass or zinc screws to secure brackets.
Fit gutter lengths, starting from the outlet, then adding unions and other parts as you go.
Ensure gutter overlaps joints to the insertion marks stamped on gutter parts.
Fit parts to gutter ends before screwing part to fascia.
Fit gutter lengths back to front by tilting the back edge under the back clip, and snap in at the front.
Use of a lubricant, such as silicone grease, on gasket seals can ease fitting and improve performance.

Delivery

SHIPPING

We endeavour to despatch most orders placed within 1 working day, where possible we will despatch orders on the same working day if payment is received before 1.00pm. Accurate despatch times can be found on individual product pages.

Most orders (those being stock items below 1.2m in length) will be despatched same day when ordered before 1pm, and received the following delivery day. We deliver items of that size from Monday to Saturday. Stock items over 1.2m are sent using a two-day carrier, who do not deliver on a weekend.

Due to the size and nature of some bespoke, and non-stock products, we offer restricted delivery options. Delivery options can be selected at the checkout page before payment Is made.

DELIVERY AND RETURNS

Any dates quoted for delivery of the goods are approximate only and Truly PVC shall not be liable for any direct, indirect or consequential loss suffered by the customer arising from any delay in the delivery of the goods.

All deliveries must be received, and where appropriate, signed for, by a person over the age of 18 years old.

Delivery shall take place and risk shall pass to you upon the earliest of the following:

- goods are handed over to the customer or its agent at the Company’s premises, or
- the goods leave the premises of Truly PVC, or
- on the 7th day following notification to the customer that the goods are ready for despatch.

Customers should notify us within 7 days of the date of the invoice for any alleged defect damage, failure to comply with description, delivery failure or discrepancy or any missing items, components or products. If you fail to comply with these provisions, the goods shall be conclusively presumed to be in accordance with the Contract and free from any defect or damage, and you will be deemed to have accepted the goods.

Customers will also be responsible for obtaining all necessary licences and permissions for the import of the goods into the country of destination.

Long Lengths (over 1.2m)

For any product over 1.2m in length we cannot guarantee a ‘Next Day’ delivery service. Products over 1.2m have to be manually handled in some Depots and this can often add 1 – 2 days to the delivery time.

DELIVERY PROHIBITIONS

If your order is for an aerosol item, is over 1 metre in length, and you live in a remote location such as the Scottish Highlands, offshore islands or Northern Ireland, we may not be able to fulfil your order or have to add a levy surcharge to cover the extra delivery costs to these areas.

Should this be the case, we will contact you with the option of either paying the surcharge or cancelling the order. Remote postcodes include AB30-AB38, AB40-AB56, BT, FK17-FK21, G83, GY, HS, IM, IV, JE, KA27-KA28, KW, PA20-PA99, PH, TR21-TR25, ZE.

COLLECTION (from our Warehouse)

To collect your order from our Warehouse, simply choose 'Collect in Person' as the Shipping Method. We shall call you if there is a problem preparing the order, so be sure to provide a contact telephone number when ordering. Stock items are usually available for collection 1 business day from order being placed. To enquire about early collection or non-stock items like polycarbonate, please call 0161 339 4982.

Our Warehouse, which is located at the following address, is open for collection between 8:30am and 4:30pm Monday-Friday, 8:30am to 12:30pm on Saturdays, and 8:30am to 4:30pm on Sundays.

Unit 2, 34 Wood Street
Openshaw
Manchester
M11 2FB

*Bespoke items may take 1-2 working days to prepare for collection, with non-stock items, such glazing bars and roof sheets taking longer. Please enquire before making your journey to collect.

Reviews

Item added to your basket